Table of Contents
Advertisement
Quick Links
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to www.methven.com or call Customer Service
New Zealand
0800 804 222
436831
Australia
1300 638 483
0800 195 1602
AROHA SHOWER MIXER
WITH DIVERTER
INSTALLATION GUIDE
TECHNICAL SPECIFICATIONS
Operating Pressure:
Min 150kPa, Max 1000kPa.
Recommended 150-500kPa.
Recommended installation of a pressure
limiting valve if supply exceeds 500kPa.
Operating Temperature:
Hot: Min 55°C (at mixer), Max 80°C.
Cold: Min 5°C.
NB: New Zealand Building Code Clause G12 -
Water Supplies specifies all outlets used
primarily for personal hygiene shall deliver
water at a safe temperature.
Inlet Connections:
All ½" BSP.
UK
Issue A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for METHVEN AROHA
Summary of Contents for METHVEN AROHA
- Page 1 Inlet Connections: All ½” BSP. Methven warrants this product against manufacturing defects and that it is suitable for use under the operating conditions specified in this instruction sheet. For your warranty please refer to www.methven.com or call Customer Service...
- Page 2 IMPORTANT Please read all of the instructions before installation Avoid restrictive piping, fittings or sharp angled bends when plumbing the mixer. Do not hydrostatic test the installation with this mixer installed. Damage to the ceramic headworks may occur. Hole cutout Plastic Template All pipe-work must be thoroughly flushed prior to installation of the mixer.
Need help?
Do you have a question about the AROHA and is the answer not in the manual?
Questions and answers