Endress+Hauser Brief Operating Instructions page 23

Levelflex FMP53 HART
6.2.3 Turning the transmitter housing
To provide easier access to the connection compartment or display module, the transmitter
housing can be turned:
8 mm
1. Unscrew the securing screw using an open-ended wrench.
2. Rotate the housing in the desired direction.
3. Tighten the securing screw (1,5 Nm for plastics housing; 2,5 Nm for aluminium or
stainless steel housing).
Endress+Hauser
max. 350°
Mounting
8 mm
A0013713
23