Advertisement
Adjust the Lens
Install Illuminators: Strobe Lights and Flash Lights
Illuminator appearance and ports
Strobe light
Cable Type
Color
Three-core cable
Brown: 220 V (live); blue: 220 V (neutral);
(power cable)
yellow-green: GND (earth)
Red: positive level output terminal (T1–T4)
Level signal cable
Black: GND
Yellow: not involved
Red: positive trigger (F1+, F2+, F3+, and F4+)
Boolean value signal cable
Black: negative trigger (F1-, F2-, F3-, and F4-)
Note:
• The T ports of Huawei standard checkpoint cameras can only identify levels ranging from 0 V to 5 V.
• Actual cables may vary. Please refer to the device label.
• If the signal control cable of the illuminator is not clearly identified as a level output or a Boolean value cable,
check the illuminator instructions or consult the illuminator supplier to confirm the signal control cable type.
• Waterproof and insulate the pigtail cables to prevent water from entering the device. For details, see the Quick
Start Guide delivered with the camera.
Determine Scenario
Requirements
Flash light
Adjust the Illuminator
Install Illuminators
6
Light Spot
Cable connection between cameras and illuminators
Strobe light
Flash light
Install and Adjust
Radar Detectors
Advertisement
