Advertisement
Search for and Log In
Adjust Camera Angles
to a Camera
Configure the Checkpoint Application Mode
1. Log in to the camera web system (https://IP address) and set parameters of the checkpoint
application mode.
•
For the camera web system of the 9.0.0.SPC6xx version, choose Settings > ITS Configuration
> Application.
•
For the camera web system of versions earlier than 9.0.0.SPC600, click App Home. On the page
that is displayed, click the ITS application and choose Intelligent Transportation > Application.
2. Set Application mode to Checkpoint.
3. Set the detection mode and capture mode, select required violation detection items, and click Save.
•
For the camera web system of the 9.0.0.SPC6xx version, select
mode,
Dual-shutter
for Capture mode, and
Violation Types and Lanes tab page.
•
For the camera web system of versions earlier than 9.0.0.SPC600, select
Detection mode,
Dual-shutter
on the Violation Type tab page.
Camera web system of the
9.0.0.SPC6xx version
Adjust the
Camera Focus
Video-based
Radar-based
for Speed measurement on the
for Capture mode, and
Radar-based
Camera web system of versions earlier than 9.0.0.SPC600
Configure
Checkpoint Services
4. Set the total number of associated lanes, parameters of each lane, as well as
external lights associated with the lanes. Click Save.
for Detection
Video-based
for
for Speed measurement
15
Set Illuminator
Commission the
Parameters
Radar Detector
Camera web system of the 9.0.0.SPC6xx version
Camera web system of versions earlier than 9.0.0.SPC600
Advertisement
