Search for and Log In
Adjust Camera Angles
to a Camera
Configure External Devices and Scenes
1. Draw detection lines and license plate recognition areas as required. The figure on
the right shows an example.
•
For the camera web system of the 9.0.0.SPC6xx version, choose Settings > ITS
Configuration > Application, and click the Scene Configuration tab.
•
For the camera web system of versions earlier than 9.0.0.SPC600, choose
Intelligent Transportation > Scene Configuration.
2. Set external device parameters as required. For example, set the parameters of loop
vehicle detectors and radar detectors.
•
For the camera web system of the 9.0.0.SPC6xx version, choose Settings > ITS
Configuration > Application, and click the External Devices tab.
•
For the camera web system of versions earlier than 9.0.0.SPC600, choose
Intelligent Transportation > External Device.
3. Go to the View or Traffic Snapshots page and click Enable Real-time Capture or
Manual. The camera will then start detecting and taking snapshots, while real-time
results are displayed on the right of and below the video pane.
Adjust the
Configure
Camera Focus
Checkpoint Services
16
Set Illuminator
Commission the
Parameters
Radar Detector