Advertisement
Adjust the Lens
Adjust the Lens
1. Before the operation, ensure that the camera is powered off. Loosen the screws on the lens base,
and push the lens and the base towards the viewing window carefully and slowly until the gap
between the front end of the lens and the inner side of the viewing window is
occluding the
lens). Then tighten the screws on the base.
Guide rail
Note:
To use P-Iris for a super low-light checkpoint camera, select a Huawei certified P-Iris lens. Connect to the IRIS port when installing an auto iris lens.
Determine Scenario
Requirements
Adjust the Illuminator
Install Illuminators
around 2 mm (without
1
Light Spot
2. Adjust the camera's aperture for optimal
image brightness. Loosen the screw on the
aperture ring and adjust the aperture to
F1.8 to
F2.2. Use a flat-head screwdriver to
tighten the screw on the side of the lens.
Aperture ring
Install and Adjust
Radar Detectors
Advertisement
