Hyundai RAC 312 Instruction Manual page 15

RADIO OPERATION
For AM reception, this unit uses an internal directional aerial, rotate the unit for best reception.
For FM reception, the wire FM Antenna (5) on the back of the unit should be fully unwound.
1) Set the Function Selector (13) to the "ON" position.
2) Set the Band Selector (10) to the required waveband.
3) Use the Tuning Control (11) to select the desired station.
4) Adjust the Volume Control (9) to the desired listening level.
5) To turn off the radio, set the Function Selector (13) to "OFF". If the radio does not switch off
this may be caused by inadvertent operation of SLEEP function. To cancel this, press the
Snooze Button (6) once.
WAKE TO RADIO
Having selected your desired station and adjusted the desired listening level,
proceed as follows:
1) Follow the instructions for "ALARM TIME SETTING" above.
2) When the desired alarm time has been selected, set the Function Selector (13)
to the "AUTO" position.
3) The radio will switch on automatically at the pre-set alarm time.
4) The alarm can be temporarily stopped for 9 minutes by pressing the Snooze Button (6)
once.
5) Press the Alarm Set Button (1) once to turn off the radio. The alarm will activate again
at the set time on the following day unless the Function Selector (13) is set to "OFF"
(AUTO indicator (14) lights off).
WAKE TO BUzzER
1) Follow the instructions for "ALARM TIME SETTING" above.
2) When the desired alarm time has been selected, set the Function Selector (13) to the "AL."
position.
3) The alarm tone will switch on automatically at the pre-set alarm time.
4) The alarm can be temporarily stopped for 9 minutes by pressing the Snooze Button (6)
once.
5) Press the Alarm Set Button (1) once to turn off the buzzer.
The alarm will activate again at the set time on the following day unless
the Function Selector (13) is set to "OFF" (AUTO indicator (14) lights off).
SLEEP TO RADIO
The radio can be set to switch off automatically after a period of time from 1 minute to 1 hour
59 minutes, by following this procedure:-
1) Set the FUNCTION Selector (13) to "OFF" position or, if the alarm is to be activated,
the "AUTO" position or "AL." position.
2) Press the Sleep Set Button (3) and simultaneously press the Minute Set Button (8),
or Hour Set Button (7) until the display shows the exact sleep time you wish the radio
to continue to play before switch off.
3) The radio will turn off automatically after the pre-set sleep time has elapsed.
4) To switch off the radio before the end of the sleep time period, simply press the Snooze
Button (6) once.
EN - 15
EN