golmar Art 4 LITE/G2+ User Manual page 17

ART 4 LITE/G2+ MONITOR
Continued from previous page.
PERIOD OF TIME FOR 'DO NOT DISTURB' MODE MENÚ
"Automatic door openning": This selection is visible in the "Do Not Disturb" settings menu, with the special
code '0441' (Doctor mode) already entered in the monitor for automatic door opening
codes pp. 23 to 26). Note: In standby monitor, you can also access the menu by pressing the push
button....... (blinking in white color) on the monitor.
To set a period of time for automatic door openning
door panel), go to the option with icon
by pressing the button below icon
59 minutes) for 'Automatic door openning' mode, by pressing corresponding buttons
validate the changes made by pressing the button below icon
Option selection screen
07 00
07 00
Option selection screen
07 00
07 00
mode (after 3 seconds of receiving a call from the
1
pressing the button below icon
.Then you can set a period of time (from 00h & 01 minute to 23h &
or and select the option
/
.
Time period setting screen
07 00
08 30
Continued overleaf
17
(see special
1
and / ,
# #
# #