Canon L380S User Manual page 71

4
Press [OK] twice.
5
If you delete all the numbers registered under the group, press [Clear] to delete the name ➞ press [OK].
6
Press [Stop/Reset] to return to standby mode.
● To change the number and/or name:
2
Press [ (-)] or [ (+)] to select the number you want to change ➞ press [OK] twice.
3
Press [Clear] to delete the numbers registered under the group.
4
Select the speed dialing numbers you want to register in the group ➞ press [OK] twice.
•
To enter in the group a number stored under a One-Touch Speed Dial button, press the desired One-Touch
Speed Dial button(s).
•
To enter a number stored under a Coded Speed Dialing code, press [Coded Dial] ➞ enter the two-digit code* for
the number using the numeric buttons. For multiple entries, press [Coded Dial] between each entry.
*Enter a three-digit code for the FAX-L390 model.
NOTE
•
You cannot register numbers in the groups that have not been registered for One-Touch or Coded Speed Dialing.
•
You can review the numbers registered under the group by pressing [ (-)] or [ (+)].
5
Press [Clear] to delete the name.
6
Press the numeric buttons to enter the new name ➞ press [OK].
For details on how to enter or delete letters, see "Entering Numbers, Letters, and Symbols," on p. 3-1.
7
To change additional groups, repeat steps 2 to 6.
-or-
If you have finished registering groups, press [Stop/Reset] to return to standby mode.
Group Dialing 5-11
5