Enlarging/Reducing Using Custom Copy Ratios - Canon L380S User Manual

Enlarging/Reducing Using Custom Copy Ratios

1
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Enlarge/Reduce] twice.
Z O O M 5 0 - 2 0 0 %
-
3
Use the numeric buttons to enter the copy ratio ➞ press [OK].
Z O O M 5 0 - 2 0 0 %
-
•
You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
•
Even after entering the copy ratio, you can use [ (-)] or [ (+)] to adjust the copy ratio. To increase the copy
ratio, press [ (+)]. To decrease the copy ratio, press [ (-)].
NOTE
To reset the copy ratio, press [Enlarge/Reduce] several times to display <DIRECT 100%> ratio ➞ press [OK].
1 0 0 % +
➞
8 0 % +
8 0 % A 4
T E X T
Setting Enlarging/Reducing
01
11-5
11