Operating the Machine with Restrictions ON
This section describes how to operate the machine with the operation restriction features set up and
turned 'ON'.
1
If you see the message <ENTER DEPT. ID> when the machine is in standby mode, the restriction is turned
'ON'. Enter the Department ID using the numeric keys ➞ press [OK].
2
If the message <DEPT. ID PASSWORD> is displayed, enter the Department password using the numeric
keys ➞ press [OK].
D E P T . I D P A S S W O R D
3
Continue operating the machine.
NOTE
To return to standby mode with the message <ENTER DEPT. ID>, press [ID].
9
9-8
Restricting Machine Operation (Department ID Management)
3 1 / 1 2 2 0 0 5 S A T 1 5 : 1 1
➞
F a x O n l y
S T A N D A R D