Chapter 11 Making Copies; Making Copies - Canon L380S User Manual

Making Copies

This chapter describes how to make copies with your machine.
Making Copies
One of the machine's convenient features is its ability to make up to 99 high-quality copies of a
document. To make copies, do the following:
1
Load the document in the ADF.
For details on how to place or load documents, see "Loading Documents in the ADF" on p. 6-3.
2
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
3
Use the numeric buttons to enter the number of copies.
You can set up to 99 copies.
4
Adjust any necessary settings for your document.
•
Press [Image Quality] to select the scanning resolution. (See "Adjusting the Image Quality (Resolution)," on
p.11-6.)
•
Press [Exposure] to select the scanning exposure. (See "Adjusting the Exposure (Density)," on p.11-6.)
•
Press [Enlarge/Reduce] to select the copy ratio. (See "Setting Enlarging/Reducing," on p.11-4.)
5
Press [Start].
NOTE
To cancel copying, press [Stop/Reset].
11
CHAPTER
Making Copies 11-1