Advertisement
Quick Links
Lima - Coffee Table
Assembly Instructions -
Dimensions
Width - 117cm
Depth - 49cm
Height - 37cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Please keep for future reference
275/5205
MADE IN
BRITAIN
Issue 1 - 01/07/14
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Argos Lima Coffee Table
Summary of Contents for Argos Lima Coffee Table
- Page 1 Lima - Coffee Table Assembly Instructions - 275/5205 Please keep for future reference Dimensions Width - 117cm Depth - 49cm MADE IN Height - 37cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 1 - 01/07/14...
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 22kgs. space to layout the parts before recommend the Please lift with care. starting.
- Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Left Side Right Side Large Back (D1908A) (D1123A) (D1126A) (335 x 485mm) (335 x 485mm) (224 x 650mm) Upright...
- Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
- Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare the drawer front Screw 2 metal dowels into the holes shown on the back of the drawer front Note: Tighten metal dowels up fully against...
- Page 6 Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
- Page 7 Assembly Instructions Step 7 Fit the wedgefixes Turn the drawer assembly over. Slide a wedgefix into the centre of the small groove located on the back of the drawer front and the drawer back Once in place, tighten up the screws in the wedgefixes Step 8 Runners must be...
- Page 8 Assembly Instructions Step 9 screw screw screw Prepare the left side Fit runner to the left side The 1st screw uses the 2nd hole in from the front of the runner. The 2nd and 3rd screws use the holes that line up with the other panel holes.
- Page 9 Assembly Instructions Step 10 Prepare the small back Insert 4 large locking nuts into the small back , as shown. Note: Arrow on locking nut must point towards hole in edge of panel. Step 11 Join the left side and small back Push the small back onto the left side...
- Page 10 Assembly Instructions Step 13 screw screw screw Prepare the upright Fit runner to the upright The 1st screw uses the 2nd hole in from the front of the runner. Front The 2nd and 3rd screws edge use the holes that line up with the other panel holes.
- Page 11 Assembly Instructions Step 15 Fit the left side and small back to the top and upright Push the left side onto the top locate the small back onto the upright The 2 small metal dowels fitted to the top must slide into the top of the 2 hollow core locking nuts fitted to the left...
- Page 12 Assembly Instructions Step 17 Prepare the base Insert 4 large locking nuts into the base as shown. Note: Arrow on locking nut must point towards hole in edge of panel. Step 18 Fit the large back Note: The gap between the large Position the large back back and the right so that the screws...
- Page 13 Assembly Instructions Step 19 Fit the base Push the base onto the left side Attach the base the large back upright using 4 screws Use a screwdriver to tighten the 2 large locking nuts fitted to the base Note: Turn the large locking nuts as far as they will go - more than...
- Page 14 Assembly Instructions Step 21 Prepare the right side Screw 4 large metal dowels into the holes shown on the right side Push 2 hollow core locking nuts into the right side , making sure that they are flush against the panel’s surface.
- Page 15 Assembly Instructions Step 23 Note: Tighten this hollow core locking Fit the right side nut at step 24 Push the right side onto the top , base and plinths The 2 small metal dowels fitted to the top must slide into the top of the 2 hollow core locking nuts fitted to the right...
- Page 16 Lift with care. Drawer If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW ALR3074...
Need help?
Do you have a question about the Lima Coffee Table and is the answer not in the manual?
Questions and answers