Setting The Year / Month / Date / Time / Day Of The Week; Using The 12 / 24-Hour Display; Setting The Alarm; Activating / Deactivating The Alarm - Auriol Z30237B Operation And Safety Notes

Press and keep pressed the WAVE button
for longer than 3 seconds. The LCD radio-con-
trolled wall clock attempts to receive the DCF
radio time signal. This process takes several
minutes and is indicated in the LC display by a
flashing radio symbol
note: If the radio-controlled clock cannot pick up the
DCF radio signal on account of an error or the distance
from the transmitter, etc., it is also possible to set the
time manually. As soon as reception of the DCF sig-
nal is successful, the manual settings are overwritten.
Setting the year / month /
date / time / day of the week
1. Press and keep pressed the WAVE button
approx. 3 seconds. The radio symbol
flashes.
2. Press and keep pressed the WAVE button
again for approx. 3 seconds to stop the recep-
tion of the radio time signal.
3. Press and keep pressed the SET button
approx. 2 seconds. The year display flashes.
4. Set the desired value by pressing the UP
DOWN button .
22
5. Confirm your settings by pressing the SET but-
ton . The month display flashes.
25
6. Repeat steps 4 and 5 to set the values for day,
hour, minute and day of the week.
The following languages are available:
GER = German
FRE = French
SPA = Spanish
ITA = Italian
DAN = Danish
DUT = Dutch
ENG = English

Using the 12 / 24-hour display

Q
While time display
UP button to switch between 12- hour and
23
24-hour format.
8 GB
21
.
2
21
2
21
for
25
23
is indicated press the
1
note: The AM icon
mornings in 12-hour format. The PM icon
on the LCD stands for afternoons in 12-hour
format.

Setting the alarm

Press the SET button
alarm 1
15
Press and keep pressed the SET button
about 2 seconds. The hour display flashes.
Press the UP
the desired value.
Press the SET button
The minute display flashes.
Press the UP
for the desired minute value.
Press the SET button
Press the SNOOZE button
alarm signal sounds. The alarm signal stops
sounding. The alarm will sound again 5 minutes
after the set waking time or alarm time.
Press any button except the SNOOZE button
to stop the alarm signal sounding.
or
activating / deactivating the
alarm
Press the ALARM button
priate alarm symbol
played to indicate that the alarm is activated.
Pressing the ALARM button
the appropriate alarm symbol
to cease to be displayed. The alarm is deacti-
vated.

Switching off the alarm signal

Press any button except the SNOOZE button
to stop the alarm signal sounding. You do not
have to reactivate the alarm. It reactivates itself
automatically according to the weekly rhythm.
note: The alarm signal switches itself off after
2 minutes.
on the LCD stands for
14
once or twice to select
25
or alarm 2 .
16
or DOWN button
23 22
to confirm your setting.
25
or DOWN button
23 22
to confirm your setting.
25
as soon as the
20
briefly. The appro-
24
or
15 16
again causes
24
15
13
for
25
to set
to set
20
is dis-
or
16
20