Jackson Systems Wireless Comfort WCZ-600-T User Manual page 7

Caution! Do not make any changes to the Installer Options or your Wireless Comfort™
thermostat may fail to operate properly.
To access the thermostat Installer Options menu, press and hold the
approximately 5 seconds or until the following appears on the display.
If Option 01, Zone 01 appears, this is the correct thermostat. To exit the menu, press the
key.
MENU
To select Vacation Mode, press the
Zone One
Controlling
MENU
In normal operation, the Vacation Mode is
the word is displayed and then press the
On
Zone One
Controlling
MENU
The thermostat will now display
Permanent Hold and then set unoccupied heating and/or cooling temperatures. The zone one
thermostat now becomes the master control and all other zone thermostats are disabled. When
the thermostat calls for heating or cooling, all zones will receive conditioned air. If the thermostat
is set in the
Continuous Fan
Upon return from an extended leave, the Vacation Mode must be turned off in order for all other
zone thermostats to have individual control. Remember to take the thermostat out of
Hold if you want it to resume a pre-programmed schedule. Simply press the
thermostat displays
Schedule
O1
Zone
O1
Option
NEXT
HOLD ENTER
key 3 times until the following appears on the display.
MENU
OFF
NEXT
HOLD ENTER
. To turn it on, press the
OFF
key.
ENTER
O
NEXT
HOLD ENTER
Zone One Controlling On
mode, all zones will receive ventilation air.
.
key for
ENTER
and
UP DOWN
. You can place the thermostat in
Permanent
HOLD key until the
ENTER
keys until
7