Fax Settings - Canon FAX-L400 Facsimile Manual

FAX SETTINGS

USER SETTINGS
1.TEL LINE SETTINGS
1.USER TEL NO.
2.TEL LINE TYPE
TOUCH TONE
ROTARY PULSE
3.TX START SPEED
4.RX START SPEED
2.UNIT NAME
3.TX TERMINAL ID
ON
1.TTI POSITION
2.TEL NUMBER MARK
OFF
4.DENSITY CONTROL
1.LIGHT
2.STANDARD
3.DARK
5.OFFHOOK ALARM
ON
OFF
10-4
Name Descriptions
The basic operation settings in the Fax mode can be
specified.
Specify the telephone line settings.
Your telephone and fax number can be registered within
20 digits, including spaces.(→ p. 2-6)
Selects the telephone line type. (→ p. 2-8)
The telephone line is set for touch tone dialling.
The telephone line is set for rotary pulse dialling.
Sets the transmission speed for all documents you send.
33600bps/14400bps/9600bps/7200bps/
4800bps/2400bps
Sets the transmission speed for all documents you receive.
33600bps/14400bps/9600bps/7200bps/
4800bps/2400bps
You can register your name or your company name
within 24 characters, including spaces. (→ p. 2-6)
Prints your ID (Transmitting Terminal ID) on each page
you transmit. (→ p. 2-4)
After you turn the terminal ID on, you can do the
following settings.
OUTSIDE IMAGE: Terminal ID is printed outside the
image border.
INSIDE IMAGE: Terminal ID is printed inside the image
border.
Selects the prefix for the identification header number.
FAX, TEL
No terminal ID is printed on the pages you send.
Sets the density of the documents. Nine levels of the
density are provided.
Sets for dark documents.
The density suitable for dark documents can be adjusted
with four levels.
Sets for standard documents. The density suitable for
standard documents can be adjusted with three levels.
Sets for light documents. The density suitable for light
documents can be adjusted with four levels.
Enables/disables the offhook alarm that alerts you when
the handset is not in the handset cradle.
After reception, the offhook alarm sounds when the
handset of extension telephone is left off the hook.
No offhook alarm.