Chapter 7
Special Features
Special Dialling
This section explains special dialling features, such as dialling through a switchboard, dialling an overseas
number, and switching temporarily to tone dialling.
Dialling an Overseas Number (With Pauses)
When you dial or register an overseas number, you may need to insert a pause within and/or after the number.
The length and location of the pause depend on the telephone system of your country.
1
Press FAX to set to Fax mode.
03/12 2002 TUE 15:11
FaxOnly
Ex:
2
Prepare the document and load it face up in the ADF.
DOCUMENT READY
(Standby to scan)
• If you use the platen glass to send a document → p. 4-9.
3
Use the numeric keys to dial the international access code.
TEL=
Ex:
• If you enter the wrong number, press Stop/Reset → enter the correct number.
• For details on international access codes, contact your local telephone company.
4
If necessary, press Redial/Pause to enter a two-second* pause (p).
TEL=
Ex:
• For a longer pause, press Redial/Pause again for another two-second* pause. Alternatively, you can change
the length of the pause. (→ p. 10-6)
* The pause length varies depending on the current country selection.
STANDARD
00
00P
7
7-1