Canon FAX-L400 Facsimile Manual page 94

Name
2.FAX/TEL OPT. SET
1.RING START TIME
2.F/T RING TIME
3.F/T SWITCH ACTION
RECEIVE
DISCONNECT
3.INCOMING RING
OFF
ON
RING COUNT
4.MAN/AUTO SWITCH
OFF
ON
F/T RING TIME
5.REMOTE RX
ON
REMOTE RX ID
OFF
Descriptions
When FaxTel has been set, the optional settings are
available.
Sets the duration that the machine listens for a fax tone
before starting to ring.
00 to 30SEC
Sets the length of time the machine rings to alert you of
an incoming call.
010 to 060SEC
Selects the action taken after the F/T RING TIME
expires.
The machine switches to the fax receive mode
automatically at this point and starts to receive the
document.
The machine disconnects the call.
Sets whether the machine rings when it receives a call
when the machine is set to FaxOnly.
The machine does not ring when it receives a fax. (In
Energy Saver mode, the fax may ring one or two times.)
The machine rings when it receives a fax if a telephone is
connected.
Sets the number of incoming rings before the machine
answers.
01 to 99TIMES
Sets whether the machine switches to document receive
mode after ringing for a specified length of time in the
manual receive mode.
The machine keeps ringing until someone answers the
call manually with a connected extension telephone.
The machine switches to document receive mode after
ringing for a specified time.
Sets the length of time to elapse before the machine
switches to the document receiving.
01 to 99SEC
Enables/disables remote receiving. (→ p. 5-5)
The machine enables remote receiving.
You can dial code on the remote extension to start
receiving a document.
A combination of two characters using 0 to 9, T T and #
(25) is possible.
The machine disables remote receiving.
10
10-7