Tx (Transmission) Report - Canon FAX-L400 Facsimile Manual

TX (Transmission) REPORT

The machine is factory-set to print a TX (transmission) REPORT only when an error occurs during sending.
To change this setting → p. 10-5.
If you set the machine to print a report, a TX REPORT or an ERROR TX REPORT, similar to the ones
below, will be printed depending on the setting you select.
03/12 2002 17:47 FAX 123 4567
TRANSMISSION OK
TX/RX NO
DESTINATION TEL #
CONNECTION ID
ST. TIME
USAGE T
03/12 2002 17:21 FAX 123 4567
PGS. SENT
RESULT
OK: Transmission successful
NG: Some or no pages sent
Number or pages sent
Transmission duration
Transmission time
CANON
***********************
*** TX REPORT ***
***********************
0003
1 432 2060
Canon OPTICS
12/27 14:59
00 00
CANON
0
NG #018
BUSY/NO SIGNAL
*******************************
ERROR TX REPORT
***
*******************************
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
DESTINATION TEL #
DESTINATION ID
ST. TIME
TIME USE
PAGES SENT
RESULT
THE SLEREXE COMPANY LIMITED
SAPORS LANE¥BOOLE¥DORSET¥BH25 8ER
TELEPHONE BOOLE (945 13) 51617 — FAX 1234567
Our Ref. 350/PJC/EAC
Dr. P. N. Cundall,
Mining Surveys Ltd.,
Holroyd Road,
Reading,
Berks.
If you enable the REPORT WITH TX IMAGE setting. (→ p. 10-5)
The first page of the document will print on the report to remind
you of the contents of the document.
001
***
0004
20 545 8545
Canon EUROPE
03/12 17:21
00 18
1
NG #0018 BUSY/NO SIGNAL
December 3, 2002
8
001
8-3