Canon FAX-L400 Facsimile Manual page 93

TX SETTINGS
1.ECM TX
ON
OFF
2.PAUSE TIME
3.AUTO REDIAL
ON
1.REDIAL TIMES
2.REDIAL INTERVAL
OFF
4.TIME OUT
ON
OFF
RX SETTINGS
1.ECM RX
ON
OFF
10-6
Name Descriptions
Sets the transmission functions.
ECM (Error Correction Mode) transmission is turned on
or off.
All transmissions are conducted with ECM if the other
party's fax supports ECM.
ECM is turned off.
Sets the length of the pause you insert into a dialling
sequence.
01 to 15SEC
Sets whether to perform automatic redial when the other
line is busy or no answer.
Customizes the redial operation.
Sets the number of retries.
01 to 10TIMES
Sets period of time between rediallings.
02 to 99MIN.
After the first attempt at dialling fails, redialling is not
attempted.
Enables/disables automatic scanning of documents after
the fax number is entered by using speed dialling.
Scanning begins automatically in 5 or 10 seconds after
you enter the phone number. (→ pp. 4-9, 4-14, 4-15)
Press Start to scan document. Otherwise, AUTO CLEAR
function activates and the LCD returns to standby display
after 2 minutes. (→ User's Guide)
Sets the reception functions.
ECM (Error Correction Mode) reception is turned on
or off.
All receptions are conducted with ECM if the other
party's fax supports ECM.
ECM is turned off.