Page 2
Handling and Safety Precautions These precautions must be observed strictly to ensure safe long-term use of the product. The following precautions should be strictly observed: 1. This model is made of special materials with texture similar to human skin. The model must be handled carefully in the same manner as handling an actual person.
Table of Contents 1. Outline and Features 2. Names of Parts and Structure 3. Handling Instructions KOKEN Postpartum Breast Care Model 4. Handling Instructions Latch on mask for KOKEN Baby 5. Instructions for Care 6. Specifications...
2. Users can feel adequate close fit when wearing the model and can take a natural breastfeeding position. 3. By attaching Latch on mask for KOKEN Baby on your KOKEN Baby, users can practice the support for an appropriate latch of babies and breastfeeding posture.
2. Names of Parts and Structure KOKEN Postpartum Breast Care Model ① ③ ② ④ ⑤ Name of the part Quantity Harness ① ② Air pump ③ Baby powder ④ Protective board ⑤ 1 pair Breast bag (right and left)
Page 6
Latch on mask for KOKEN Baby Name Quantity Latch on mask for KOKEN Baby Instruction manual (this brochure) KOKEN Breastfeeding Simulation Set The set consists of KOKEN Postpartum Breast Care Model and Latch on mask for KOKEN Baby.
3. Handling Instructions KOKEN Postpartum Breast Care Model 3-1 How to wear 1. Fit the chest part of the model to the chest of the wearer, and then fasten the shoulder belts. 2. Fasten the back belt. Back belt * When the back belt is loose (for instance, when the wearer is thin), fasten the supplementary hook and loop fastener.
Page 8
3-2 Adjustment of engorgement of breast The hardness and shape of breasts can be adjusted by inflating and deflating the breast bags. 1. Attach the connector of the air pump to the two-way cock. Connect the lure lock to the connecting port of the two-way cock.
Page 9
3. After completing the adjustment of air, turn the handle of the two-way cock to close and remove the connector of the air pump. Close 4. Secure the air tube with the hook and loop fastener under the arm so that the tube does not get in the way.
Page 10
3-3 Attaching and removing breast bags When applying baby powder inside the breast skin or washing the model, remove the breast bags. How to remove 1. Remove the protective board and lift the flap of the harness. * Do not discard the protective board by mistake. 2.
Page 11
How to attach 1. Lift the flap of the harness, and then slowly push the breast bags into the harness from the opening in the center of the backing sheet. Breast bags can be placed easily in the harness by starting from the upper edge while enlarging the opening of the backing sheet.
4. Handling Instructions Latch on mask for KOKEN Baby 4-1 How to attach 1. Cover the face of KOKEN baby with Latch on mask for KOKEN Baby starting from the jaw. The ears of the mask do not reach the ears of KOKEN Baby.
5. Instructions for Care ・ Clean the skin of the products by wiping the surface with neutral detergent or alcohol pads. After drying, apply the powder. * Do not use solvents, such as thinners and benzin. ・ Clean the cloth parts by gently patting them with a piece of cloth dampened with neutral detergent, and wring out.
Name of the part Material Harness 100% cotton Breast skin Silicone Breast bag Urethane Latch on mask for KOKEN Baby Name of the part Material Mask Silicone Size, weight KOKEN Postpartum Breast Care Model Weight KOKEN Postpartum Breast Care Model Approximately 1.6 kg...
Need help?
Do you have a question about the LM-113A and is the answer not in the manual?
Questions and answers