Page 1
LM-017 Instruction Manual Thank you for purchasing the LM-017 Inspection and Palpation of Breast Cancer Training Model II. Please read this instruction manual carefully to ensure correct use of the product, and store it in a safe place for easy access.
Page 3
Handling and Safety Precautions These precautions should be strictly observed in order to ensure safe, long-term use of the product. The following precautions should be observed particularly strictly 1. The model is made using special silicone rubber to simulate the texture of human skin, and may be damaged if excessive force is applied.
Table of Contents 1. Outline and Features 2. Components 3. Description of parts 4. Using the model 4-1 Putting on the model 4-2 Caring for the model after use 5. Specifications...
1. Outline and Features Outline The incidence of breast cancer is high in women in the prime of life. Chances of recovery are highest if breast cancer is detected and treated at an early stage. To check for breast cancer, begin by visually inspecting and palpating the breasts.
2. Components Names of the Components Quantity ① Inspection and Palpation of Breast Cancer Training Model II main body 1 ② Baby powder ③ Storage case Instruction Manual (this document)
3. Description of parts Symptom Number Description Lumps ① to ⑤ 80-90% of breast cancers start as a painless lump. Skin If the cancer approaches the skin, the skin may become changes ⑤ depressed to form a dimple. (dimple)
4. Using the model 4-1 Putting on the model 1) Open the hook-and-loop fasteners on the upper belt of the model. Wrap the belt around your neck and fasten the hook-and-loop fasteners in place. Upper belt 2) Open the hook-and-loop fasteners on the lower belts. Wrap the belt around your torso and fasten the hook-and-loop fasteners in place.
4.2. Caring for the model after use 1) Wipe away dirt or smudges with gauze or another cloth. If very dirty, wipe with moist gauze using a neutral solvent diluted with water. Gauze 2) Pat the baby powder that came with the kit all over the model. Baby powder 3) Place the model in the storage case as shown in the picture below.
5. Specifications Length Width Height Weight Main body Approx. 22 cm Approx. 30 cm Approx. 11 cm Approx. 1.2 kg Storage case Approx. 27 cm Approx. 34 cm Approx. 13 cm Approx. 1.2 kg...
Need help?
Do you have a question about the LM-017 and is the answer not in the manual?
Questions and answers