Valor G3 Series Installation Instructions Manual page 3

4. For 738 B-Vent Heaters. Clip the extension baffle
onto the sheet metal edge directly below the draft
hood of the unit to extend the sheet metal forward
to the back of the screen mesh when the doors are
installed.
IMPORTANT: Ensure the baffle is installed as
shown, with the tabs pointing down.
5. Hook the clip-on window trim to the window frame
mounted to the heater by placing it over the
window frame and dropping the two tabs into the
slots behind the rivets at the top of the window
frame (not required for RA24ZC installation).
6. Loosen the bolts on the back of the cast iron fender
and drop the fender into place within the slotted
holes of its support at the base of the door frame.
Hang the cast iron ashpan on the hooks within the
fender.
7. Drop the door on the hinge pins.
8. Should the doors not close completely at the top,
use 2 magnets stacked together—one rare earth
magnet without cap and one regular magnet with
cap (supplied loose). Apply them to the backside of
the left door on the left hand side at the top. This
should pull the doors completely in.
Cleaning
The surround and the screened doors can be cleaned
with a soft brush.
To clean the fireplace glass window, refer to the owner's
manual supplied with the appliance.
Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.
Designed and Manufactured by / for
Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valorfireplaces.com
Repair Parts List
Extension Baffl e (not required
1
with RA24ZC applications)
Clip-on Window Trim (not
2 required with RA24ZC
applications)
3 Lower Support
4 Magnet Bracket
5 Magnet (1 loose, 1 in cap)
Magnet (1 loose in cap)
6 Hinge Bottom Piece
7a LH Hinge Upper Piece
7b RH Hinge Upper Piece
8 RH Screen Door Assembly
9 LH Screen Door Assembly
10 Door Frame
11 Fender
12 Door Shield
Hardware Kit
6
7a
9
8
WARNING
DO NOT TOUCH THE DOORS OR FIREPLACE
WHILE THEY ARE HOT! Let the fireplace
cool first before cleaning it.
FOR SAFETY PURPOSE, ensure the screen
doors are closed after maintenance before
operating the fireplace.
4000622BY
4002394BY
4000611AZ
4000612
4000458
420K551
4000695
4000696
4000697
4000557
4000551
4000550
RA24TB
4004088
4001214
1
2
12
6
10
7b
4
5
3
11
3