Advertisement
（5）卡料時，排除方式
當褲耳有折到或堆疊時，'' 停止燈① '' 會亮起，
自動機會停止動作，請依照下列順序排除。
A. 按下 '' 停止燈① ''，燈會熄滅。
B. 在 "SENSOR ②下 "，將折損的褲耳拉出，按
下 '' 再送帶③ '' 裁剪。
C. 按 " 起動鍵④ " 即可運轉。
P22
All manuals and user guides at all-guides.com
②
(5) When looping anomaly, the solution is
While loop is breaking or lapping, the ''Stop
① '' button will light on, and the Auto-machine
will stop. Please follow the procedures as
below to relief the situation.
A. Press ''Stop ① '' button, the light will go out.
B. Under the ''SENSOR ② '', pulling out
the breaking loop and press the ''FEED-
AGAIN ③ '' in order to trim.
C. Press the ''Start Switch ④ '', then machine
will be started.
①
④
③
Advertisement
