Sunny Health & Fitness SF-RB4936 User Manual page 10

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 5:
Remove 6 Screws (No. 24), 6 Arc Washers
(No. 21) and 6 Spring Washers (No. 50)
from the Main Frame (No. 1) with Allen
Wrench (No. 116).
CAUTION: Please make sure the Tension
Control Knob (No. 25) is at the lowest
resistance level (level 1, all the way to the
left) before you connect any wires together.
Attach the Tension Control Wire (No. 25a)
into the metal bracket of Tension Wire (No.
26) as shown in drawing A. Then, pull
Tension Control Wire (No. 25a) upward
and insert it into the slot of metal bracket of
Tension Wire (No. 26) as shown in drawing
B. Make sure the metal fitting on Tension
Control Wire (No. 25a) is secured in the
metal bracket.
Connect the Handle Pulse Wire (No. 33) to
Flexible Wire (No. 47); and connect
Sensor Wire (No. 32) to the Extension
Sensor Wire
connecting wires into Front Post (No. 2).
Attach the Front Post (No. 2) to the Main
Frame (No. 1) with 6 Screws (No. 24), 6
Arc Washers (No. 21) and 6 Spring
Washer (No. 50) that were removed.
Tighten and secure with Allen Wrench (No.
116).
NOTE: Be careful not to pinch any wires
when attaching Front Post (No. 2) to Main
Frame (No. 1)
9
(No. 113). Insert the