Table of Contents
Advertisement
You can now use the
forward (respectively) along the options; if you move the cursor off the end
of the line, it reappears at the opposite end.
If you press the
example), you will get information on that particular mode of operation, viz:
which is typical of the meaning of the buttons in a measurement mode (as
opposed to their use within the menu).
Help on options:
If you press the
will be told of two additional features
which will be described later.
Selecting a mode:
If you press the
measurement options
that option.
As explained in the INFO you have already read, the
return to the MENU, but please note that the first message from the option
may be
in which case it will only respond to the
have to press first.
To switch the back-light on:
A second press of the
to conserve the battery, the back-light goes out after about a quarter of an
hour
.
and
buttons to move the CURSOR back and
button while the cursor is on one of the modes (for
SET button while the cursor is on the
SET button while the cursor is on one of the three
,
or
ON button switches on a back-light for the display;
, the CM9 will select and "enter"
button is used to
button, which you will therefore
option, you
5
Advertisement
Table of Contents
