Advertisement
Quick Links
DOUBLE SIT DOWN SLIDE HOOD
IMPORTANT NOTES: Read First
(A) Use liquid thread lock (such as Loctite
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Refer to Installation Manual for R5-09 Collars, R5-11 Socket Clamps, and R5-1702 Double Slide assembly
instructions.
®
) with all threaded hardware. Important: Liquid thread lock (prior to
Figure 1.1
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
Double Sit Down Slide Hood
See Installation Manual Sections
R5-1702 Double Slide
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
R5-1306
Page 1 of 3
FIGURE 1
See Installation Manual
Sections R5-09 Collars
and R5-11 Clamps
Rev A
10/10/2009
Advertisement
Related Manuals for Playcraft Double Sit Down Slide Hood R5-1306
Summary of Contents for Playcraft Double Sit Down Slide Hood R5-1306
- Page 1 R5-1306 DOUBLE SIT DOWN SLIDE HOOD Page 1 of 3 IMPORTANT NOTES: Read First ® (A) Use liquid thread lock (such as Loctite ) with all threaded hardware. Important: Liquid thread lock (prior to curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a lubricant during assembly.
- Page 2 R5-1306 DOUBLE SIT DOWN SLIDE HOOD Page 2 of 3 Step 1 (Factory Assembled) Attach Sit Down Hood Bars to the Slide Hood as shown in Figure 2. 39" 991mm SLIDE HOOD R5 1/4"x 1-1/4" BH TR FRONT ELEVATION Tek Screw 1/4"...
- Page 3 R5-1306 DOUBLE SIT DOWN SLIDE HOOD Page 3 of 3 Specifications Parts List SIT DOWN SLIDE HOOD: Part # DESCRIPTION Shall be constructed of UV-stabilized, rotationally HS-1001-R5 Socket Clamp Set R5 molded, linear, low density polyethylene with an average wall thickness of .250". Assembled Parts List SIT DOWN SLIDE HOOD - TOP RAIL: Shall be constructed of 1.315"...
Need help?
Do you have a question about the Double Sit Down Slide Hood R5-1306 and is the answer not in the manual?
Questions and answers