Playcraft Multi-Section Horiz. Crawl Tube R5-1500-3 Installation Instructions

MULTI-SECTION HORIZ. CRAWL TUBE
IMPORTANT NOTES: Read First
(A) Use liquid thread lock (such as Loctite
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Do not pour concrete until the equipment is completely assembled, leveled and plumbed. Concrete must be
allowed to cure completely before using the equipment (at least 72 hours).
(C) Refer to Installation Manual for R5-1601 Panel-Type1 (Rotomolded) Assembly and 1708 Tube Support
Assembly.
(D) Use appropriate compliant protective surfacing and adjust footing depths accordingly. See free publication -
The Handbook for Public Playground Safety, Publication #325 at www.CPSC.gov for the surfacing appropriate
for the fall height of the equipment or consult you surfacing supply representative.
FIGURE 1
Multi-Section Horiz. Crawl Tube
Note: Tube orientations will vary,
see Top View of structure for
appropriate Tube orientations
®
) with all threaded hardware. Important: Liquid thread lock (prior to
See Installation Manual Section
R5-1601 Panel-Type1 (Rotomolded)
Assembly
Figure 1.2
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
Figure 1.1
See Installation Manual Section
1708 Tube Support Assembly
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
R5-1500-3 Thru 6
Page 1 of 3
Rev D