Fan Mode; Setting The Timer - Rotenso CONTROL Series User Manual

Remote contol - DEFO
EN
REMOTE CONTROL SUPPORT

6.4. FAN Mode

Press MODE button
to select FAN mode
MODE
NOTE:
In FAN mode, you can't set the temperature. As a result , no temperature displays in remote screen.

6.5. Setting the TIMER

TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
6.5.1. TIMER ON setting
Press TIMER button to initiate
the ON time sequence.
TIMER
6.5.2. TIMER OFF setting
Press TIMER button to initiate
the OFF time sequence.
TIMER
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes increments with each press, up to
10 hours. After 10 hours and up to 24, it will increase in 1 hour increments. (For example, press 5 times to get 2.5h,
and press 10 times to get 5h,) The timer will revert to 0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
24
User manual
Set the fan speed in range of
AU-100%
Press Temp. up or down button
for for multiple times to set the
desired time to turn on the unit.
x5
Press Temp. up or down button
for for multiple times to set the
desired time to turn off the unit
x10
Turn on the air conditioner
Point remote to unit and wait
1sec, the TIMER ON will be
activated.
1
sec
Point remote to unit and wait
1sec, the TIMER OFF will be
activated.
1
sec