Buttons And Functions - Rotenso CONTROL Series User Manual

Remote contol - DEFO
EN
REMOTE CONTROL SUPPORT

4. BUTTONS AND FUNCTIONS

Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control.
The following is a brief introduction to the remote control itself. For instructions on how to operate your air
conditioner, refer to the How to Use Basic Functions section of this manual.
1
2
3
4
5
6
DEFO
20
User manual
1. ON/OFF
Button to turn on and turn off the air conditioner.
2. TEMP
Increases temperate in 0.5°C (1°F) increments. Max. temperature
is 30°C (86°F).
Note: Press together
will alternate the temperature display between the °C & °F.
3. SET
Scrolls through operation functions as follows:
7
The selected symbol will flash on the display area, press OK
8
button to confirm.
4. TEMP
Decreases temperature in 0.5°C (1°F) increments. Min.
9
10
temperature is 16°C (60°F).
5. FAN SPEED
Selects fan speeds in the following order: AU
11
60% 80%
12
Press together
in 1% increments.
13
6. SWING
14
Starts and stops the horizontal louver movement. Hold down for
2 seconds to initiate vertical louver auto swing feature.
7. MODE
Scrolls through operation modes as follows: AUTO
DRY HEAT
Note: HEAT mode is not supported by the cooling only appliance.
8. ECO Smart Eye
Used to detect the people activities in the room to save energy.
9. OK
Used to confirm the selected functions.
10. TIMER
Set timer to turn unit on or off
11. ECO/GEAR
Press this button to enter the energy efficient mode in a
sequence of following:
ECO GEAR (75%)
& buttons at the same time for 3 seconds
100%.
& buttons to increase/decrease the fan speed
FAN
GEAR (50%) Previous setting mode
20% 40%
COOL