Removing The Keyboard - Clevo W370ET Service Manual

Removing the Keyboard

1. Turn off the computer, and turn it over and remove the battery
2. Use a screwdriver to carefully push out the speakers cover
3. Turn the computer over, unsnap the speaker cover
4. Remove screws - from the keyboard
3 7
5. Carefully lift the keyboard
8
board ribbon cable from the locking collar socket
9
pins away from the base (Figure
6. Carefully lift up the keyboard
a.
b.
2
c.
3 4 5
2
All manuals and user guides at all-guides.com
(page 2 -
2
upwards from the center of the computer
2
(Figure 9c).
up, being careful not to bend the keyboard ribbon cable
by using a flat-head screwdriver to pry the locking collar
10
9d).
(Figure 9e) off the computer.
8
d.
1
e.
6 7
5), and component bay cover
at point .
1
. Disconnect the key-
9
8
9
10
Re-Inserting the
When re-inserting the
keyboard firstly align the
four keyboard tabs at
8
the bottom
at the bottom of the key-
board with the slots in
the case.
Keyboard Tabs
Disassembly
Figure 9
Keyboard Removal
(page 2 - 9).
a. Use a screwdriver to
(Figure 9b).
carefully push out the
speakers cover
1
point .
b. Turn the
over, unsnap the LED
cover module upwards
from the center of the
computer.
c. Remove screws from
the keyboard.
d. Carefully lift the key-
board up and discon-
nect the
ribbon cable from the
locking collar socket by
using a
screwdriver to pry the
locking
away from the base.
e. Remove the keyboard.

Keyboard

(Figure 9e)
2. Speaker Cover
8. Keyboard
• 5 Screws
Removing the Keyboard 2 - 13
at
computer
keyboard
flat-head
collar pins