Table of Contents
Advertisement
Removing the Hard Disk(s) in the Secondary HDD Bay
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the component bay cover and remove screws
3. The hard disk will be visible at point
-
4. Remove screws
(Figure 5c
5
6
5. Grip the tab and slide the hard disk in the direction of arrow
6. Lift the hard disk assembly
-
7. Remove the screws
9
10
8. Reverse the process to install any new hard disk(s).
a.
1
2
c.
d.
6
5
All manuals and user guides at all-guides.com
-
1
3
on the mainboard
(Figure 5b
4
)
.
out of the compartment
(Figure 5e
8
to release the hard disk(s)
11
b.
3
e.
7
8
and the cover.
)
.
(Figure 5d
).
7
)
.
and hard disk mylar
from the case
12
4
f.
11
10
Disassembly
Figure 5
Secondary HDD
Assembly Removal
a. Remove the screws and
cover.
b. Locate the hard disk.
c. Remove the screws.
.
13
d. Slide the HDD out.
e. Lift the hard disk assem-
bly out off the computer.
f. Remove the screws and
separate the HDD(s)
from case.
12
c.
8 Hard Disk Assembly
11. Hard Disks
12. Hard Disk Mylar
13. Hard Disk Case
9
• 5 Screws
13
Removing the Hard Disk Drive 2 - 9
Advertisement
Table of Contents
