Advertisement
16
Attach the shower hose only and flush through
the system for 15 seconds to clear any debris
before fitting the shower head. Thread the
conical end of the shower hose through the
hose restraint before attaching the head and
fitting it in the handset holder.
!
Please ensure that both hose washers (supplied
in screw pack no. 3) are fitted at each end of
the hose.
17
When the shower head is connected, run the
shower at maximum temperature (factory
pre-set). If the temperature needs regulating,
adjust the setting using a small screw driver
under the black protective flap on the digital
processor in dry surroundings. Take care not to
over turn the adjuster.
!
Site conditions can affect temperature settings, installer to adjust as required.
ALL COPPER PIPE WORK MUST BE CROSS-BONDED AND CONNECTED TO A
RELIABLE EARTHING POINT.
Quartz Digital exposed with adjustable height head installation instuctions
page 10
Advertisement
