Simple Start Guide; Quick Overview; Step 1: Unpacking; Step 2: Preparing The Remote - Sony DVP-NS999ES Operating Instructions Manual

Simple Start Guide

Quick Overview

A quick overview presented in this guide will
give you enough information to start using the
player for your enjoyment. To use the
surround sound features of this player, refer
to "Hookups" on page 20.
Notes
• You cannot connect this player to a TV that does
not have a SCART (EURO AV) or video input
jack.
• Be sure to disconnect the mains lead of each
component before connecting.

Step 1: Unpacking

Check that you have the following items:
• Audio/video cord (pinplug
3) (1)
• Mains lead (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
Connecting the mains lead
Connect the supplied mains lead to the AC IN
terminal of the player.
16
Step 2: Preparing the
Remote
You can control the player using the supplied
remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries
to the markings inside the compartment.
When using the remote, point it at the remote
sensor
• Do not leave the remote in an extremely hot or
3 y pinplug
• Do not drop any foreign object into the remote
• Do not expose the remote sensor to direct light
• If you do not use the remote for an extended
When you have more than one
Sony DVD player
If the supplied remote interferes with your
other Sony DVD player, set the command
mode for this player and the supplied remote
to one that differs from the other Sony DVD
player.
The default command mode setting for this
player and the supplied remote is DVD 1.
on the player.
Notes
humid place.
casing, particularly when replacing the batteries.
from the sun or a lighting apparatus. Doing so
may cause a malfunction.
period of time, remove the batteries to avoid
possible damage from battery leakage and
corrosion.
COMMAND
MODE switch