Step 2: Connecting The Audio Cords - Sony DVP-NS999ES Operating Instructions Manual

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects: None
Stereo amplifier (receiver) and two speakers
• Surround effects: None
or
MD deck/DAT deck
• Surround effects: None
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 88)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 88)
– DTS (5.1 ch) (page 88)
– Super Audio CD Multi channel (page 90)
– MPEG audio (5.1 ch) (page 89)
or
AV amplifier (receiver) with digital input jacks
having a Dolby, DTS**, or MPEG audio decoder
and 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 88)
– DTS (5.1 ch) (page 88)
– MPEG audio (5.1 ch) (page 89)
24
through .
A D
Connection
(page 26)
A
(page 27)
B
(page 28)
C
(page 29)
D
Your setup (example)