Adjusting The Speaker Volume - Sony DVP-NS999ES Operating Instructions Manual

REAR (3 m)
SUBWOOFER
(3 m)
Note
If each of the front or rear speakers are not placed at
an equal distance from your listening position, set
the distance according to the closest speaker.
LEVEL (FRONT)
Varies the level of the front speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB)
R (0 dB)
CENTER
(0 dB)
SUBWOOFER
(DVD: –5 dB/
SUPER
AUDIO CD: 0
dB)
84
Set this within –5 and +2 m
of the "FRONT" setting in
0.05 m increments. For
example, if "FRONT" is set
to 6 m, "REAR" can be set
between 1 and 8 m.
Set this within –5 and +2 m
of the "FRONT" setting in
0.05 m increments. For
example, if "FRONT" is set
to 6 m, "REAR" can be set
between 1 and 8 m.
Set this between –6 dB and 0
dB in 0.5 dB increments.
Set this between –6 dB and 0
dB in 0.5 dB increments.
Set this between –12 dB and
0 dB in 0.5 dB increments.
For DVDs:
(When "SIZE" is set to the
default setting):
Set this between –10 dB
and +10 dB in 0.5 dB
increments.
(When "SIZE" is not set to
the default setting):
Set this between –15 dB
and +5 dB in 0.5 dB
increments.
For Super Audio CDs:
Set this between –10 dB and
+10 dB in 0.5 dB increments.
LEVEL (REAR)
Varies the level of the rear speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
R (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
To adjust the volume of all the speakers at
one time
Use the amplifier's (receiver's) volume
control.
TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust "LEVEL (FRONT)" and "LEVEL
(REAR)."
OFF The test tone is not emitted
from the speakers.
ON The test tone is emitted from
each speaker in sequence while
adjusting level.

Adjusting the speaker volume

and level
1
Select "SPEAKER SETUP" in the Setup
Display.
2
Select "TEST TONE" and set to "ON."
You will hear the test tone from each
speaker in sequence.
3
From your listening position, select
"LEVEL (FRONT)" or "LEVEL (REAR)"
and adjust the value using X/x.
The test tone is emitted from both left and
right speakers simultaneously.
4
Select "TEST TONE" and set to "OFF"
to turn off the test tone.
Note
The test tone signals are not output from the digital
jack.