Sony DVP-NS999ES Operating Instructions Manual page 23

• Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In the case of progressive scan picture problems, it is
recommended that you switch the connection to the standard definition output. If there are questions
regarding your Sony TV set's compatibility with this DVD player, please contact our customer service
centre.
• If you cannot view the pictures from a VCR through this player which is connected to a TV with RGB
component jacks, set
cannot receive the signal from the VCR.
• If you want to use your VCR's SmartLink function, connect the VCR directly to your TV's SCART (EURO
AV) jack and connect the player to the TV with another jack.
• The SmartLink function may not work properly if your VCR is connected to your TV via the SCART
(EURO AV) jacks on the player.
• When you connect the player to your TV via the SCART (EURO AV) jacks, the TV's input source is set
to the player automatically when you start playback or press any button except for \/1. In this case, press
TV/DVD on the remote to return the input to the TV.
When you play a disc recorded in the NTSC colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC colour system and the picture may not appear
on the PAL colour system televisions. In this case, open the tray and remove the disc.
CD/DVD player
to t (Audio/Video) on your TV. When you select
VCR
TV
Connect
directly
(RGB), the TV
23