Settings For The Sound (Audio Setup) - Sony DVP-NS999ES Operating Instructions Manual

Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the sound
according to the playback and connection
conditions.
Select "AUDIO SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 74).
The default settings are underlined.
AUDIO SETUP
AUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to "ON." The player reduces the audio
output level.
This function affects the output of the
following jacks:
– AUDIO OUT L/R jacks
– LINE 1 (RGB)-TV jack
– 5.1CH OUTPUT jacks
OFF
Normally select this position.
ON
Select this when the playback sound
from the speakers is distorted.
AUDIO DRC (Dynamic Range Control)
(DVD VIDEO/DVD-RW only)
Allows smaller sounds to be heard at low
volume when playing a DVD that conforms
to "AUDIO DRC." This affects the output
from the following jacks:
– AUDIO OUT L/R jacks
– LINE 1 (RGB)-TV jack
– 5.1CH OUTPUT jacks
– DIGITAL OUT (OPTICAL or COAXIAL)
jack only when "DOLBY DIGITAL" is set
to "D-PCM" (page 81).
80
AUDIO ATT:
AUDIO DRC: STANDARD
AUDIO FILTER:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
STANDARD Normally select this position.
TV MODE
WIDE
RANGE
AUDIO FILTER (except Super Audio CD)
Selects the digital filter to reduce noise above
22.05 kHz (Sampling frequency (Fs) of the
audio source is 44.1 kHz), 24 kHz (Fs is 48
kHz), or 48 kHz (Fs is above 96 kHz).
SHARP
OFF
SHARP
SLOW
ON
D-PCM
PCM
D-PCM
48kHz/16bit
Note
There may be little effect by changing the digital
filter depending on the disc or playback
environment.
DOWNMIX (DVD VIDEO/DVD-RW only)
Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital or DTS format. For details
on the rear signal components, see
"Displaying the audio information of the
disc" (page 58). This function affects the
output of the following jacks:
– AUDIO OUT L/R jacks
– LINE 1 (RGB)-TV jack
– DIGITAL OUT (OPTICAL or COAXIAL)
jack when "DOLBY DIGITAL" and "DTS"
is set to "D-PCM" (page 81).
DOLBY
SUR-
ROUND
NORMAL
Makes the low sounds clear
even if you turn the volume
down.
Gives you the feeling of being
at a live performance.
Provides a wide frequency
range and spatial feeling.
Provides smooth and warm
sound.
Select this when the player is
connected to an audio
component that conforms to
Dolby Surround (Pro Logic).
Select this when the player is
connected to an audio
component that does not
conform to Dolby Surround (Pro
Logic).