Table of Contents
Advertisement
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (1~3) shown below.
Be sure to connect the power cord last.
to LINE IN
L/R (AUDIO)
IN
OUT
to LINE OUT
L/R (AUDIO)
1
(supplied)
* If you are connecting a VCR and your TV
has only one available input jack
(DVP-NS415 only)
If your TV has only one available input jack,
connect your VCR or similar device to the
LINE IN jacks on the player. In order to view
the pictures from your VCR, the DVD player
must be in standby mode. Note that the DVD
player will only pass signals through the
LINE jacks and will not output the VCR
signals from any other jack.
If your TV has more than one available input
jack, connect your VCR directly to your TV.
16
Downloaded from:
If you are connecting to a VCR and your TV has
only one available input jack* (DVP-NS415 only)
to LINE IN
(VIDEO)
LINE
IN
R-AUDIO-L
VIDEO
OUT
R-AUDIO-L
VIDEO
to LINE OUT
(VIDEO)
to video input
Audio/video cord
to audio input
https://www.usersmanualguide.com/
to video
output
DIGITAL OUT
LINE
COMPONENT
Y
VIDEO OUT
IN
R-AUDIO-L
VIDEO
PCM/DTS/
S VIDEO
DOLBY DIGITAL
OUT
P
COAXIAL OPTICAL
B
P
R
OUT
R-AUDIO-L
VIDEO
INPUT
VIDEO
L
AUDIO
R
When connecting to a wide screen TV
Depending on the disc, the image may not fit
your TV screen.
If you want to change the aspect ratio, please
refer to page 59.
When connecting to a monaural TV
Use a stereo-mono conversion cord (not
supplied). Connect the LINE OUT (VIDEO)
jack on the player to the TV's video input
jack, and connect the LINE OUT L/R
(AUDIO) jacks to the TV's audio input jack.
to audio
output
VCR
CD/DVD Player
3
Power source
TV
2
Power source
Advertisement
Table of Contents
