Settings For The Display (Screen Setup) - Sony DVP-F25 Operating Instructions Manual

Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" on page 62.
The default settings are underlined.
The on-screen displays differ depending upon
the player model.
SCREEN SETUP
TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3 LETTER
Select this when you connect a
BOX
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
4:3 PAN Select this when you connect a
SCAN 4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
64
TV TYPE:
COLOR SYSTEM:
SCREEN SAVER:
BACKGROUND: JACKET PICTURE
16:9
4:3 LETTER BOX
4:3 PAN SCAN
16:9
Note
AUTO
ON
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
COLOR SYSTEM (VIDEO CD only; For
Asian models only)
Selects the colour system when you play a
VIDEO CD.
AUTO
PAL
NTSC
Notes
• You cannot change the colour system for DVDs.
• You can change the colour system of this player
according to the connected TV. See page 15.
Outputs the video signal in the
system of the VIDEO CD,
either PAL or NTSC. If your
TV is the DUAL system, select
AUTO.
Changes the video signal of an
NTSC VIDEO CD and outputs
it in the PAL system.
Changes the video signal of a
PAL VIDEO CD and outputs it
in the NTSC system.