Additional Information; Troubleshooting - Sony DVP-F25 Operating Instructions Manual

Additional Information

Troubleshooting

If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
Power
The power is not turned on.
, Check that the AC power cord is connected
securely.
Picture
There is no picture/picture noise appears.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, Check the connection to your TV (page 18)
and switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
, The disc is dirty or flawed.
, If the picture output from your player goes
through your VCR to get to your TV or if
your player is connected to a combination
TV/VIDEO player, the copy-protection
signal applied to some DVD programmes
could affect picture quality. If you still
experience problems even when you
connect your player directly to your TV,
please try connecting your player to your
TV's S VIDEO input (page 18).
, (For Asian models only)
If the colour system of your player does not
match with that of your TV, change the
colour system of the player. For details, see
page 15. (You cannot change the colour
system of the DVD disc itself.)
, The picture on the screen becomes black
and white when you play a disc recorded in
a colour system that is different from your
TV.
Even though you set the aspect ratio in "TV
TYPE" of "SCREEN SETUP," the picture
does not fill the screen.
, The aspect ratio of the disc is fixed on your
DVD.
Sound
There is no sound.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, The player is connected to the wrong input
jack on the amplifier (receiver) (page 23,
24, 25).
, The amplifier (receiver) input is not
correctly set.
, The player is in pause mode or in Slow-
motion Play mode.
, The player is in fast forward or fast reverse
mode.
, If the audio signal does not come through
the DIGITAL OUT (OPTICAL) jack, check
the audio settings (page 67).
, While playing a Super VCD on which the
audio track 2 is not recorded, no sound will
come out when you select "2:STEREO,"
"2:1/L" or "2:2/R."
Sound is noisy.
, When playing a CD with DTS sound tracks,
noise will come from the AUDIO OUT L/R
jacks or DIGITAL OUT (OPTICAL) jack
(page 31).
Sound distortion occurs.
, Set "AUDIO ATT" in "AUDIO SETUP" to
"ON" (page 66).
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
"AUDIO DRC" to "TV MODE" (page 66).
, Set "AUDIO ATT" in "AUDIO SETUP" to
"OFF" (page 66).
Operation
The remote does not function.
, There are obstacles between the remote and
the player.
, The distance between the remote and the
player is too far.
, The remote is not pointed at the remote
sensor on the player.
69
c continued