Step 2: Connecting The Audio Cords - Sony DVP-F25 Operating Instructions Manual
Cd/dvd player
Hide thumbs
Also See for DVP-F25:
- Service manual (92 pages) ,
- Specifications (2 pages) ,
- Training manual (46 pages)
Table of Contents
Advertisement
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects: TVS DYNAMIC (page 50),
TVS WIDE (page 50)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 50)
or
MD deck/DAT deck
• Surround effects: none
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 67)
AV amplifier (receiver) with a digital input jack
having a Dolby Digital, MPEG audio, or DTS**
decoder and 6 speakers
• Surround effects: Dolby Digital (5.1ch) (page 67),
DTS (5.1ch) (page 68), MPEG audio (5.1ch)
(page 68)
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
through
.
A
D
Connection
(page 22) Example
A
(page 23) Example
B
(page 24) Example
C
(page 25) Example
D
Your setup
c continued
21
Advertisement
Table of Contents
