Dynamic Range Compression - Sony STR-DN1000 Operating Instructions Manual

When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely. Check to see if they are connected
securely and cannot be disconnected by
pulling on them slightly.
• The speaker cords may have the short-circuit
problem.
When a test tone is output from
a different speaker than the
speaker displayed on the TV
screen
The speaker pattern to the connected speaker
is not set up correctly. Make sure the speaker
connection and the speaker pattern match.
x D.Range Comp

(Dynamic range compression)

Lets you compress the dynamic range of the
soundtrack. This may be useful when you want
to watch movies at low volumes late at night.
Dynamic range compression is possible with
Dolby Digital sources only.
• MAX
The dynamic range is compressed
dramatically.
• STD
The dynamic range is compressed as
intended by the recording engineer.
• AUTO
The dynamic range is applied automatically
with Dolby TrueHD source or other source
is set to "OFF".
• OFF
The dynamic range is not compressed.
Tips
• Dynamic range compressor lets you compress the
dynamic range of the soundtrack based on the
dynamic range information included in the Dolby
Digital signal.
• "STD" is the standard setting, but it only enacts
light compression. Therefore, we recommend
using the "MAX" setting. This greatly compresses
the dynamic range and lets you view movies late at
night at low volumes. Unlike analog limiters, the
levels are predetermined and provide a very natural
compression.
x Distance Unit (Distance unit)
Lets you select the unit of measure for setting
distances.
• FEET
The distance is displayed in feet.
• METER
The distance is displayed in meters.
69 GB