Sony STR-DN1000 Operating Instructions Manual page 15

Name Function
T RETURN/
Press to
a)
EXIT O – return to the previous menu.
– exit the menu while the
To return to the previous
menu of Sony TV, press TV
(D) and then press
RETURN/EXIT O.
a)
U DISPLAY
Press to display the current
status of or information on
components connected to the
receiver.
Note
In the GUI MODE, press the
button to display the menu on
the TV screen.
V RESOLUTION Press repeatedly to change the
resolution of signals output
from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack (page
72).
W INPUT MODE Press to select the input mode
when the same components
are connected to both digital
and analog jacks (page 100).
X SHIFT
Press to light up the button. It
changes the remote button
function to activate the
buttons with pink printing.
Y THEATRE
Press to turn the Theatre mode
on and off when connecting
the receiver to products
featuring "BRAVIA" Sync.
Z RM SET UP
Press to set up the remote.
a)
See the table on page 108 for information on the
buttons that you can use to control each
component.
b)
The number 5/SAT, TV CH +/PRESET + and N
buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
menu or on-screen guide of
the VCD player, DVD
player, etc. is displayed on
the TV screen.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
15
GB