Connecting A Dvd Player - Sony STR-DN1000 Operating Instructions Manual

Connecting a DVD player

The following illustration shows how to
connect a DVD player.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Notes
• The COMPONENT VIDEO IN 2 jacks have been
assigned to the DVD player. If you connect your
DVD player to the COMPONENT VIDEO IN 1 or
IN 3 jacks, set "Input Assign" in the Input Option
menu (page 100).
Video signals
COMPONENT VIDEO
IN 3 IN 2 IN 1 MONITOR
OUT
Y
P /
B
C
B
VIDEO
P /
R
C
R
ASSIGNABLE (INPUT ONLY)
AUDIO
OUT IN IN
L
R
SA-CD/CD/CD-R TV SAT
A Component video cord (not supplied)
B Optical digital cord (not supplied)
C Coaxial digital cord (not supplied)
* When you connect a component equipped with an
OPTICAL jack, set "Input Assign" in the Input
Option menu.
28 GB
DVD player
A
ANTENNA
AM
TV
DMPORT
DC5V
0.7A MAX
OPTICAL IN
VIDEO VIDEO VIDEO VIDEO
IN IN OUT IN OUT
SURROUND BACK/
AUDIO AUDIO AUDIO
MONITOR
IN IN OUT IN
L
AUDIO
OUT
R
BD VIDEO 1
SUBWOOFER
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Audio signals
B C
HDMI
IN 3
IN 4 IN 2
(for AUDIO)
ASSIGNABLE (INPUT ONLY)
DIGITAL
(ASSIGNABLE)
OPTICAL COAXIAL
SAT IN BD IN DVD IN
CENTER
FRONT B/
BI-AMP
R L
SPEAKERS
IN 1 OUT
SURROUND
R L
FRONT A
R L