Protezioni Elettriche - Electric Protection - Generac Power Systems TOWER LIGHT CUBE+ HYBRID Owner's Manual

Table of Contents

Advertisement

+
CUBE
HYBRID 8,4m 4x150W LED
14.9 PROTEZIONI ELETTRICHE – ELECTRIC PROTECTION
Nel seguente capitolo sono descritte le
protezioni elettriche poste nel quadro di
controllo
Interruttore magnetotermico differenziale.
Sull'unità
è
prevista
supplementare tramite interruttore differenziale
(RCD); uno dei due poli del generatore
monofase ed uno dei due poli dell'output
dell'inverter, unitamente alle parti metalliche
che
costituiscono
morsetto di terra principale (MET), sono
collegati a terra.
La macchina è dotata di un interruttore
magnetotermico differenziale (34) e di un
interruttore differenziale (30) in grado di
assicurare la protezione dell'utente in caso di
contatto diretti ed indiretti, in questi casi la
norma di riferimento prescrive l'interruzione
automatica dell'alimentazione. Il differenziale
magnetotermico (34) ed il differenziale (30)
assicurano tale protezione nel funzionamento
da rete (MAINS) e quando il generatore di
bordo è avviato ed alimenta il carico (HYBRID
GENERATOR) e quando il generatore è
spento (HYBRID INVERTER).
Attenzione!
L'impianto di terra deve essere conforme a
quanto prescritto nei capitoli 14.3 e 7.3.
Verificare periodicamente il funzionamento
dell'interruttore magnetotermico differenziale
(34) e del differenziale (30) premendo il
pulsante "TEST" posto sul frontale.
PROTEZIONI MAGNETOTERMICHE
Ogni carico elettrico alimentato dall' unità
prevede
una
protezione
dedicata:
Magnetotermico differenziale 16 A
(30mA): protezione generale.
Termico 6 A: protezione della centralina
idraulica.
Termico 6 A: protezione del carica
batteria
Termico 6 A: protezione proiettori a led.
DISCOVER battery
YANMAR ENGINE
la
protezione
la
macchina,
tramite
magnetotermica
The following chapter describes the electrical
protection devices featured in the control
panel.
RCD/MCB.
The unit is provided with supplementary
protection
by
Residual Current
(RCDs); either one pole of a single-phase
generator, together with the relevant metallic
enclosures
are
mechanically, to the main earth terminal
(MET).
Earth
Leakage
Breaker (RCD/MCB) (34) and Earth Leakage
Circuit Breaker (RCD) (30) guarantee user
protection
against
contacts. Reference standard prescribes
automatic disconnection of the supply for
protection
against
contacts. Earth Leakage Magnetothermic
Circuit Breaker (RCD/MCB) (34) and Earth
Leakage Circuit Breaker (RCD) (30) ensure
this protection when the unit is supplied by
means of utility (MAINS), when onboard
generator is running on load (HYBRID -
GENERATOR) and when onboard generator
is not running (HYBRID - INVERTER).
Warning!
Earthing arrangments shall be carry out as
described in 14.3 and 7.3 chapters.
Verify periodically the proper operation of the
RCD/MCB (34) and the RCD (30) by
pressing the "TEST" button placed on the
front panel.
MAGNETOTHERMIC PROTECTION
All load supplied by means of the unit is
provided
by
dedicated
protection.
16 A RCD/MCB: main protection
6 A circuit breaker: hydraulic gear
box protection
6 A circuit breaker: battery charge
protection
6 A circuit breaker: led lamps
protection.
49
Device
collected,
electrically-
Magnetothermic
Circuit
direct
and
indirect
direct
and
indirect
thermomagnetic
TL203-01-12-00
16-07-2018
Italiano - English

Advertisement

Table of Contents
loading

Table of Contents