Casall X200 Manual page 14

STEP 7
1. Remove the pre-installed screws (pt.L-1) on the Pedal post first.
2. Attach the Lower handlebar (pt.E & E-8 R/L) to the left and right pedal post (pt
then close the cover (pt
3. Assemble the Right pedal (pt.M-14) onto the Right pedal post (pt.L-2) with 2 Knobs (pt. P-18),
2 Spring washers (pt.P-19),2 Bushings (pt.P-20) and 2 Carriage bolts (pt.P-17).
4. Assemble the Left pedal (pt.M-11) onto the Left pedal post (pt. L) with 2 Knobs (pt.P-18), 2
Spring washers (pt.P-19),2 Bushings (pt.P-20) and 2 Carriage bolts (pt.P-17).
*2
M3X25
M6X40 7X 12X25
M-9 & M-10) using screws (pt.P-5 & L-1).
.
M5*14
*4
*4
6 M6
14
L & L-2), and
.