Advertisement
STEP 3
1. Connect the Computer cables (pt .D-1) to the Computer (pt.A). Then attach the Computer (pt .A)
to the Computer bracket with the enclosed Screws (pt. A-1).
STEP 4
1. Remove the pre-installed Screws (pt.D-2) on the handlebar post first.
2. Attach the Front handlebar (pt.B) to the Handlebar post (pt.D) using the clamp cover (pt.P-3),
and then fix with two Flat Washers (pt.P-2), two Spring Washers (pt.P-4), two Fixing Bolt
(pt.P-1).
3. Assemble the Front post cover (Front & Rear) (M-1 & M-2) to the handlebar post using
Screw (M5x14L) ( D-2), Screw (M3*25) (P).
4. Attach the Cover (Front & Rear) (M-3 & M-4) to the handlebar post (pt.D) using Screw (M3x14L)
( D-2), Screw (M3*25) (pt.P-5).
5. Remove the pre-installed Screws (pt.D-2) on the handlebar post (pt.D), and then assemble the
Bottle holder (pt.M-7) by Screw (pt. D-2).
4*M5*10
*5
M5*14
*2
7*2T
7*1T
M7*30
*2
M3*14
*4
M3*25
11
Advertisement
