Advertisement
STEP 6
1. Attach the Left and Right lower Handlebar (pt.E & E-8) to the Left and Right pedal post (pt.L &
L-2) using two Allen bolt (pt.P-15), four Flat washers (pt.P-16) and two Nylon nuts (pt.P-11). --
- Figure A
2. Attach the Pedal post (pt.L & L-2) onto the Crank connation set using Nylon nuts (pt.F-29), Flat
washers (pt.30) and Plastic washers (pt.F-31). --- Figure B
3. Connect the Right rear cover (upper) (pt.M-13) and Right rear cover (lower) (pt.M-12) to the
Left pedal post (pt.L) using screw (pt.P-5). --- Figure C
4. Connect the Left rear cover (upper) (pt.M-15) and Left rear cover (lower) (pt.M-16) to the Right
pedal post (pt.L-2) using screw (pt.P-5).
A
8X 16X1T
M8
M8X55
C
2*
D
M3x25 *6
*2
13
B
Advertisement
