Related Manuals for Clarke SP18C
Summary of Contents for Clarke SP18C
- Page 1 SPRAY GUN SPRAY GUN MODEL NO: Super Pro14C & Super Pro18C PART No: 3090050 & 3090055 OPERATION & MAINTENANCE INSTRUCTIONS 0903...
- Page 2 - 1 - - 14 -...
- Page 3 CLARKE GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase.
- Page 4 NS5P1435 NS6P1835 Please note that the details and specifications contained herein are correct at the time of going to print. However CLARKE International reserve the right to change specifications at any time without prior notice. Part not shown - 3 -...
- Page 5 IMPORTANT: with aluminium or zinc to produce an explosion hazard. T he use of parts other than CLARKE replacement parts may result in safety hazards, • decreased tool performance and may invalidate your warranty.
- Page 6 GENERAL ARRANGEMENT NOTES Fan Control Fluid Control Wings Trigger Paint Cup Vent Spray Nozzle Knurled Locking Ring Air Supply Paint Cup Locking Lever Air Flow Control Paint Cup AIR SUPPLY Super Pro spray guns are available with two nozzle sizes, 1.4mm, and 1.8mm. The larger the nozzle, the more compressed air is needed.
- Page 7 PAINT SPRAYING HINTS Cont USING THE SPRAYGUN To obtain best results, it is vital that the surface to be sprayed is well prepared. It must be Super Pro spray guns are fed with paint by a siphon (or suction) effect from the paint cup. clean, free from dust, dirt and grease.
- Page 8 PAINT SPRAYING HINTS MAINTENANCE WARNING WARNING NEVER attempt to spray unless you are wearing suitable, approved Relieve any pressure in the gun and hose, and disconnect the spray gun from respiratory and eye protection. the air supply, before any disassembly. REMEMBER that some modern paints require specialist respiratory protection...always consult the paint manufacturers instructions.
Need help?
Do you have a question about the SP18C and is the answer not in the manual?
Questions and answers